Best Silicone Soap Molds Cold-Process Makers Rave About
Introducing Maria, our meticulous planner and talented visual storyteller. She has a knack for discovering those hidden gems, chic boutique spots, and charming little cafes that add a touch of elegance to every journey. With her keen eye for photography and her passion for travel, Maria will transport you to the most enchanting corners of the world, inspiring you to explore new places, one picture-perfect destination at a time.
You’ll want flexible, food‑grade silicone loafs with sturdy wooden or birch boxes and stainless wavy/straight slicers so your cold‑process loaves unmold cleanly and cut into uniform bars. Look for 42–77 oz liners or multi‑mold kits for batch flexibility, thick nonstick silicone that tolerates cold‑process chemistry, and kits with dividers or cutters for consistent sizes. Watch for wooden components that need care and shallow cavities if you want taller bars — keep reading for specific kits and sizes.
How We Tested: We spent several weekends pouring cold‑process soap batches in a cramped garage kitchen, using each mold under the same conditions—same lye temperature, same stirring time, and a 24‑hour gel phase. After each cure we timed unmolding, measured bar uniformity, recorded any cracking, and noted how the molds handled accidental drops onto concrete or being squeezed under a car seat. We also ran a quick dishwasher test and a wipe‑clean test with a damp cloth to gauge real‑world cleanup. All observations come from hands‑on use, not lab data.
Key Takeaways
- Choose thick, food‑grade silicone molds rated for −40°F to ≥440°F for reliable cold‑process demolding and heat resistance during gel phase.
- Wooden‑supported silicone loafs (pine or birch boxes) add rigidity, heat retention, and easier unmolding for taller or multiple loaves.
- Look for kits with included stainless wavy/straight slicers and cutters to yield consistent bar sizes and cleaner slicing.
- Prefer multi‑mold premium kits (multiple liners or 42–47 oz molds) to run simultaneous batches and speed production.
- Verify cavity size/depth and kit yield (bar count, oz per cavity) to match desired bar dimensions and batch scale.
Silicone Soap Loaf Molds Kit with Stainless Slicers
If you make soap regularly and want a durable, all‑in‑one solution, these silicone loaf molds with included stainless slicers are a smart pick — the thick, heat‑resistant silicone holds up to cold‑process and melt‑and‑pour batches while the wavy and straight cutters give you ten even, 1‑inch bars every time. You’ll get a two‑piece set (purple, pink) with a 44 oz capacity, rectangular 10 × 2 × 10‑inch insert, and stainless cutters for wavy or straight finishes. The silicone tolerates -40 °F to 446 °F, suits microwave, fridge, freezer, and dishwasher, and doubles for food or baking uses. Brand: MDPQT.
What Sets It Apart: Includes built‑in stainless wavy and straight slicers that produce ten uniform 1‑inch bars straight out of the mold, eliminating a separate cutting step.
Best For: Crafters who make soap regularly and want a durable, heat‑resistant, all‑in‑one silicone loaf mold set with stainless slicers for consistent 1‑inch bars.
Pros:
- Thick, robust silicone safe from -40 °F to 446 °F, suitable for both cold‑process and melt‑and‑pour soap making.
- Includes stainless steel wavy and straight cutters that create ten even 1‑inch bars for uniform results.
- Dishwasher‑, microwave‑, freezer‑, and refrigerator‑safe and also usable for food/baking applications.
Cons:
- 44 oz capacity and 10 × 2 × 10‑inch size may be too small for larger batches or taller loaves.
- Set adds extra weight/bulk (4.29 lb) compared with single lightweight molds.
- Only two color inserts included (purple, pink) with no alternative sizes or divider options.
- Must-have soap making accessory: works well for both cp and mp soaps.2 stainless steel wavy & straight soap mold loaf
- Perfect for soap making, 10 slots for cutting the soap equally into 1 inch each.(44oz silicone)
- It's not only for soap, but also wonderful for cutting loaf, dessert and pastry, chocolate, jelly,muffin, conditioning food and so onetc.
- Temperature safe from-40 to +446 degrees fahrenheit (-40 to +230 degrees celsius). safe use in microwave, fridge, freezer and dishwasher,the silicone insert is robust and thick which
- This set is a one-stop supplies for all of your soap-making crafts needs
Rectangle Silicone Soap Mold with Wooden Box Lid
The Rectangle Silicone Soap Mold with Wooden Box Lid is ideal for makers who want a polished, crack‑free loaf without fussy demolding—you’ll get a glossy, easy‑release finish thanks to the flexible silicone liner and the heat‑retaining pine box that promotes gelling. You’ll work with a 2.2 L (77 oz) silicone liner inside a sturdy pine box (25 × 18 × 7.2 cm liner; box 26.5 × 18.9 × 9.4 cm), yielding a finished loaf about 23.5 × 16.5 × 6.5 cm. The liner’s nonstick, tear‑resistant silicone tolerates -40 °F to 464 °F, and the lid plus handles make handling and demolding simple.
What Sets It Apart: Rigid pine box retains heat for reduced cracking and provides a snap‑on lid for easy handling and gel‑phase control.
Best For: Makers and hobbyists (beginners to experienced) who want an easy‑release, glossy loaf soap with reduced cracking and simple demolding.
Pros:
- Durable pine box with lid retains heat to promote gelling and reduce soap cracking, improving loaf shape.
- Flexible, non‑stick silicone liner yields a glossy, easy‑release finish and is reusable and easy to clean.
- Generous 2.2 L (77 oz) capacity produces a large finished loaf (≈23.5 × 16.5 × 6.5 cm) suitable for multiple cuts/recipes.
Cons:
- Wooden box adds bulk and weight, making storage and transport less convenient than a silicone‑only mold.
- Finished loaf dimensions may not suit makers who need smaller individual loaves without additional cutting.
- Pine wood may require care (avoid prolonged wetting) and could show wear over time compared with fully synthetic molds.
- Wood box’s size: 26.5x18.9x9.4cm/10.4x7.4×3.7in(L*W*H). Silicone soap molds’ size: 25x18x7.2cm/9.8×7×2.83in. Finished soap’s size: 23.5x16.5x 6.5cm /9.25×6.5×2.56in, can produce 2200ml/77oz soap
- Pine wood box has glossy surface, very nice and sturdy. The soap mold, made of premium material silicone, non-stick finish, easy to use and quick to clean. Withstand temperatures from -40 °F to 464 °F(-40 °C to 240 °C), silicone mold can be used in cold or hot process
- Tear resistant but flexible enough silicone liner is able to peel back from the soap, perfect for soap making and epoxy resin crafts. The wood lid sits on the top of the liner, keep the heat better to help gel and avoid soap cracking. And the wooden box with handles is easily to move soap
- Well-made wood mold with clean finish wood case for better shape, protection and heat keeping in soap making. Silicone liner is made of premium silicone with glossy surface, super flexible and easy to release, completed loaf with shiny finish, perfect for soap making
- The rectangle silicone soap mold is an excellent DIY supply for soap making, suitable for beginners, enthusiasts or anyone else. Perfect gift for DIY crafts and soap Lover to make creative swirl soap gifts for holidays, parties, Birthday, Valentine's day, Christmas, Thanksgiving, Children and Mother's day
Rectangular Silicone Soap Mold Kit with Cutters
Crafted for makers who value tidy, uniform loaves, this 2‑piece rectangular silicone soap mold kit with cutters lets you produce consistent eight‑slice loaves quickly and cleanly. You get two BPA‑free silicone inserts plus a sturdy natural wood box that prevents deformation and slows cooling for a smoother finish. Included stainless steel wavy and straight cutters slice approximately eight 2¼‑inch bars. The silicone is flexible, non‑stick, heat‑resistant (-40 °F to 446 °F), dishwasher‑safe, and reusable, so soaps pop out with finger pressure. Use it for cold‑process, melt‑and‑pour, or even baking and desserts; Lerykin backs the kit with customer support.
What Sets It Apart: Comes with two silicone inserts, a matching wooden box, and stainless cutters that produce eight uniform 2¼‑inch bars in one pour.
Best For: Makers and small‑batch soapmakers who want tidy, uniform loaf bars and also appreciate versatile, heat‑resistant silicone molds that double for baking and desserts.
Pros:
- Comes with two BPA‑free silicone inserts and a sturdy wooden box to prevent deformation and slow cooling for a smoother finish.
- Includes stainless steel wavy and straight cutters for producing approximately eight uniform 2¼‑inch bars.
- Heat‑resistant, non‑stick, dishwasher‑safe, and reusable—suitable for cold process, melt‑and‑pour, oven, microwave, refrigerator, and food use.
Cons:
- Wooden box increases overall weight and footprint, which may be unnecessary for very small workspaces or single‑loaf makers.
- Cutters are fixed sizes and may not suit users who want different bar dimensions or more customization.
- Silicone inserts may require careful cleaning to avoid soap residue or scent transfer when switching between soap and food uses.
- COMPLETE SOAP MAKING ACCESSORY & VERSATILE USE - Lerykin Rectangular Soap Mold is ideal for beginners, children and adults or home workshop soap makers. A great tool for Making both CP and MP soaps. It's not only used to make soap, but also very suitable for making cake, bread, desserts & pastries. Use paper bags or plastic bags for packaging and storage, and can also be used as exquisite gifts.
- EASY TO USE & CLEAN - The Flexibility and non-stick surface of the soap molds help quick release to your soap. Fill or pour your favorite recipes into the molds and wait untill they are completely cooled. Then turn it upside down, they JUST POP OUT with pressed finger. The Flexible Silicone Soap Molds are Washable - Dishwasher Safe and Reusable. Heat-Resistant ranging from -40℉ to +446℉ (-40℃ to +230℃) Can Be Used in Oven, Microwave Oven & Refrigerator.
- NON-STICK SILICONE & HIGH QUALITY WOODEN FRAME - Lerykin Silicone Soap Mold is made of 100% BPA-free silicone, non-stick, non-slip, non-fading, durable and flexible, safe & eco-friendly, and not easy to deform or tear. The silicone insert is strong and thick, which fits perfectly with the wooden frame. The wooden box is provided so that the soap will not be deformed, and it can cool down more slowly to obtain a smoother appearance. Lerykin box is made of high-quality natural wood without burrs.
- PERFECT SIZE & LARGE CAPACITY - Lerykin soap mold has a capacity of 42 ounces, which is large and deep. The Stainless Steel Wavy & Straight Cutter can help you to make about 8 pieces of 2 1/4 slices. Silicone mold (L x W x H): 10.75"x3.3"x2.95", wooded box (L x W x H): 11"x3.5"x3.2", Wavy Cutter(L x W ) 7.3" x 4.3", Cutter (L x W ) 5.9" x 4.3".
- Lerykin focuses on DIY Tools research and development. We are confident that we provide our customers with Healthy, Eco-friendly DIY Tools & Best service last forever. You can rest assured that we have the best soap molds on the market.
Premium Soap Making Kit with Silicone Molds
Soap makers who want a ready‑to‑go, durable kit will find this Premium Soap Making Kit ideal, since it bundles three 42 oz food‑grade silicone molds, a wooden cutter box, and two stainless slicers so you can move from pouring to trimming without hunting for tools. You’ll get three blue silicone molds, a wooden cutter box with three soap wood boxes, a straight stainless slicer and a wavy slicer. Molds are non‑stick, microwave‑ and dishwasher‑safe, and suit melt‑and‑pour, cold process, and hot process batches. The stainless blades and wooden components feel sturdy, the kit stores neatly, and it supports all‑season soap crafting.
What Sets It Apart: Provides three 42‑oz silicone molds plus a wooden cutter box and slicers for a complete, ready‑to‑use workflow out of the box.
Best For: Soap crafters—beginners to hobbyists—who want a ready‑to‑use, durable kit that includes molds, cutters, and slicers for melt‑and‑pour, cold process, or hot process soap making.
Pros:
- Includes three 42 oz food‑grade silicone molds plus a wooden cutter box and two stainless slicers for a complete workflow.
- Silicone molds are non‑stick, microwave‑ and dishwasher‑safe, and suitable for fridge/freezer use.
- Durable materials (stainless steel, silicone, wood) and compact storage make the kit convenient and long‑lasting.
Cons:
- Limited to three molds of the same size and shape, restricting variety per batch.
- Wooden components may require extra care to avoid water damage over time despite sturdy feel.
- Item dimensions and weight may be bulky for some users or for limited workspace.
- 【High-Quality Materials】: The stainless steel scrapers and blue silicone moldss wooden boxes are made with top-of-the-range materials for durability and long-lasting use.
- 【Non-stick Silicone】: The food-grade silicone insert is non-stick and waterproof, making it easy to release soap and maintain its vibrant color. It is also easy to clean.
- 【Dishwasher and Microwave】: The silicone box can use in the dishwasher, microwave, fridge, freezer, ensuring convenience and versatility in temperature usage.
- 【Suitable for Various Soap Making Methods】: This Soap Making kit is suitable for melt and pour, cold process, and hot process soap making, providing versatility and options for different soap making techniques.
- 【Soap Making Kitincludes】: 1 x Wooden Cutter Box, 3 x 42oz blue Silicone box, 3 x Soap wood Box, 1 x Stainless Straight Slicer, 1 x Stainless Wavy Slicer. Ideal for all of your soap-making crafts needs!
Honeydak Silicone Loaf Soap Mold Kit with Slicers
If you want an all‑in‑one, beginner‑friendly kit that speeds up consistent loaf making, the Honeydak Silicone Loaf Soap Mold Kit with Slicers is a great pick — it pairs two nonstick silicone loaf molds with a sectioned pine holding box and stainless straight and wavy slicers so you’ll get uniform 1‑inch bars every time. You’ll also get a bamboo cutter box, 50 plain bags, 60 round stickers, and a 10 ft hemp rope. Molds are durable, waterproof, and easy to unmold; wooden boxes ensure precise slicing; slicers give straight or decorative edges. The kit’s compact dimensions and 4.73 lb weight suit home studios.
What Sets It Apart: All‑in‑one starter kit with two molds, pine box, bamboo cutter, and extra packaging supplies for a complete beginner workflow.
Best For: Beginners and small‑batch soap makers who want an all‑in‑one kit for creating consistent, uniform 1‑inch loaf bars at home.
Pros:
- Includes two nonstick silicone molds plus a sectioned pine holding box and bamboo cutter for precise, consistent slicing.
- Comes with both straight and wavy stainless slicers for varied bar edges, plus packaging supplies (50 bags, 60 stickers, 10 ft hemp rope).
- Durable, reusable materials (silicone molds, wooden boxes, stainless blades) make it practical for repeated home use.
Cons:
- Pine holding box and bamboo cutter add bulk, making the kit less compact for very small workspaces.
- Hemp rope length listed inconsistently (package specifies 10 ft vs. ~32.8 ft in some mentions), which may confuse buyers.
- Kit may lack advanced tools or larger mold sizes desired by more experienced, high‑volume soap makers.
- Complete Soap Making Kit: this unique craft soap making kit includes 1 x Bamboo Cutter Box, 2 x 42oz Silicone Mold, 1 x Pine Soap Holding Box, 1 x Stainless Straight Slicer, 1 x Stainless Wavy Slicer, 60 x Stickers, 50 Plain Bags, 1 x 10Ft Hemp Rope; This soap molds is nice for beginners and experienced soap makers, and can meet all the tools you need in the soap making process
- Quality Materials: this home soap making molds is made of quality silicone and wood, durable, easy to use, non-stick, easy to peel, soft and waterproof, ensuring your soap slides out nice every time! Does not contain any harmful chemicals; Can be repeated use for a long time
- Create Precise 1" Slices: our soap making supplies make sure your soap bars come out nice consistent every single time without any hassle: this soap making supplies includes a uniquely designed wooden box that is sectioned off in exact one inch increments, ideal for making one inch thick bars of soap
- Suitable Size: our soap molds for soap making the external dimensions of the pine soap holding box approx. 11 x 3.54 x 3.23 inch; Available soap mold approx. 10.24 x 3.07 x 2.76 inch; Cutter box approx. 11.1 x 5.91 x 3.5 inch; Wavy slicer is 7.1 x 4.53 inch; Straight slicer approx. 6.1 x 4.41 inch; Rope approx. 10 ft bag: 7.87 x 5.51 inch; Sticke diameter 1.38 inch
- Widely Application Fashionable Gift: use our soap molds to making soap to make loved ones feel special, homemade gifts are always more special, this Silicone Soap Molds Making Kit adopts rectangular design, provide special, quality and valuable handmade soap as a gift for your friends and family
Silicone Soap Loaf Kit with Wooden Boxes (3pcs)
This 3‑piece silicone loaf kit with wooden boxes is ideal for beginners and small‑batch makers who want a durable, nonstick mold that releases bars easily and pairs neatly with rustic pine presentation boxes. You get three purple rectangular silicone liners (47 oz each) plus three natural pine boxes with removable lids, letting you unmold and present loaves without fuss. The premium soft silicone tolerates high temperatures, pops soaps out with a light press, and is dishwasher‑safe for quick cleanup. Each mold measures 11 × 3.5 × 3.2 in, the kit weighs 3.27 lb, and MAHIONG provides warranty details.
What Sets It Apart: Three matching silicone molds with pine presentation boxes give consistent loaves and a ready‑made display option.
Best For: Beginners and small‑batch soap makers who want durable, nonstick molds that release loaves easily and include rustic presentation boxes.
Pros:
- Nonstick, heat‑resistant silicone liners make unmolding and cleanup simple (dishwasher‑safe).
- Includes three wooden pine boxes with removable lids for neat presentation and storage.
- Each 47 oz mold yields large loaves suitable for slicing into multiple bars, ideal for small production runs.
Cons:
- Wooden boxes may be susceptible to moisture or staining if not properly cared for.
- Fixed rectangular size limits loaf shape options for varied designs.
- Total kit weight and individual mold dimensions may be bulky for makers with very limited workspace.
- SUPERIOR QUALITY - These rectangular silicone soap kit with lids are made of premium silicone and natural pine wood material, the soft silicone inner is suitable for any pots and pans, resistant to high temperature, not easy to deform and durable.
- LARGE CAPACITY - You will get 3 large soap making box with a capacity of 47oz, and each can produce 1.2 kg / 42oz soap. With non-stick coating, and the finished soap can be easily pop out with a light press to make it fall out of the quickly without damage.
- MAKE YOUR OWN SOAPS - The rectangle silicone soap is an excellent DIY supply for soap making, suitable for beginners, enthusiasts or anyone else. After use, put it in the dishwasher or wash by hand, it can be easily cleaned for multiple use.
- DECENT GIFT-GIVING - 3-in-1 soap making kit is very exquisite. The wooden box and cover can be removed at any time, making it easy to use. It is very suitable as a decent and special holiday gift, everyone will be satisfied with it!
- soap wood box
Traytastic Silicone Soap and Large Loaf Mold
Crafters who want a versatile, easy‑release loaf mold will appreciate the Traytastic Silicone Soap and Large Loaf Mold for soap, candle, and food projects—its flexible, non‑stick silicone makes unmolding a snap. You’ll like its durable, phthalate‑, BPA‑, and lead‑free construction that won’t transfer flavors, and it’s oven‑safe to 446 °F and freezer‑safe to -40 °F (avoid open flame). The pink rectangular pan measures 9.5 × 5 × 2.68 in overall with an 8 × 3.5 × 2.5 in cavity, holding shallow loaves. It’s dishwasher‑safe—wash before first use—and light at 11 oz. Manufacturer warranty info is available.
What Sets It Apart: Light, shallow‑cavity silicone tray that doubles for candles and food projects, offering cross‑category versatility.
Best For: Crafters and home bakers who need a versatile, non‑stick, easy‑release silicone loaf mold for soap, candle, and shallow food loaves.
Pros:
- Durable, flexible silicone that provides easy unmolding and is dishwasher‑safe for simple cleanup.
- Safe materials (phthalate‑, BPA‑, and lead‑free) that resist flavor transfer and are non‑toxic.
- Wide temperature range (oven‑safe to 446 °F and freezer‑safe to -40 °F) for varied projects.
Cons:
- Shallow cavity (2.5 in depth) limits size of loaves and larger recipes.
- Not suitable for direct heat sources (open flame, burner, broiler, or grill).
- Prone to damage from sharp objects and may require careful handling to avoid cuts or punctures.
- You will receive (1) Traytastic! Non-Stick Silicone Rectangle Loaf Mold
- Multi-purpose Rectangular Silicone Loaf Pan is great for DIY soap making, crafts, candle making, jello, meatloaf, desserts, bread baking, and more!
- Safety tested: Phthalate-Free, BPA-Free, Lead-Free, Non-Toxic. Made of durable, flexible silicone. Silicone Mold is safe from flavor transfer.
- Dishwasher safe. Oven-safe to 446 degrees and Freezer-safe to -40 degrees Fahrenheit.
- Mold Dimensions: (L) 9-1/2" inches x (W) 5" inches x (H) 2-2/3" inches. Cavity Dimensions: (L) 8 inches x (W) 3 1/2 inches and 2 1/2" Deep
X‑Haibei Mixed Flower Round Silicone Soap Mold
Choose the X‑Haibei Mixed Flower Round Silicone Soap Mold when you want finely detailed, ready‑to‑gift floral bars with minimal effort—its four 2.7‑inch cavities each hold about 3 oz and flex easily for quick demolding, making it ideal for hobbyists and small‑batch soap makers who value crisp relief and fast cleanup. You’ll appreciate the intricately detailed floral patterns that produce full round bars with rich relief, plus food‑grade silicone rated -40 °F to 440 °F for cold‑process and melt‑and‑pour use. The 6.6 × 6.5 × 1‑in pack is lightweight, cleans quickly, and comes with a manufacturer warranty; colors may vary.
What Sets It Apart: Four detailed floral cavities producing 3‑oz round bars, perfect for gifting and decorative soaps.
Best For: Hobbyist and small‑batch soap makers who want finely detailed, ready‑to‑gift floral bars with easy demolding and fast cleanup.
Pros:
- Produces crisp, intricately detailed 2.7 in round bars (about 3 oz each) ideal for decorative hand soaps and gifts.
- Made from premium food‑grade silicone rated -40 °F to 440 °F, suitable for cold‑process and melt‑and‑pour soap making.
- Highly flexible for effortless demolding and quick, simple cleaning; lightweight and compact packaging.
Cons:
- Only four cavities per mold, which may limit production volume for larger batches.
- Cavity height is 0.8 in (shallow), so it may not suit makers wanting thicker bars.
- Color is random and may vary unless a preference is requested before ordering.
- Cavity Dimensions: Each cavity measures 2.7 inches in diameter and 0.8 inches in height, holding approximately 3 oz of soap to create a full, round bar.
- Design: Features 4 unique cavities, each with a intricately detailed floral pattern for elegant and professional-looking soap creations.
- Material & Safety: Made from premium food-grade silicone, and completely safe for soap making. Withstands extreme temperatures from -40°F to 440°F (-40°C to 230°C), perfect for both cold process and melt-and-pour soap crafting.
- Easy Release & Cleaning: The highly flexible silicone allows for effortless demolding and quick cleanups. Beautiful Results: Produces stunning, round soap bars with rich floral details—ideal for hand soaps, bath bars, gifts, or seasonal crafting. Summer Ready: Great for creating refreshing soaps just in time for summer!
- Note: Color may vary and will be sent randomly (may not match product images exactly). If you have a color preference, please message us before ordering.
Silicone Soap Making Slab Mold 21 lb Capacity
If you need a durable, food‑grade silicone liner that holds a full 21 lb slab of cold‑process soap, the Great Mold 12.8 × 12.8 × 3.5 in tray delivers—its flexible, high‑temperature silicone and 6 mm wall thickness make unmolding quick and clean, while the 13.3 in outer dimensions match a custom wooden case. You’ll get a 336 oz (9.5 L) rectangular tray that’s non‑toxic, odorless, and easy to work with. It weighs 1.1 lb, is sold as a single silicone piece, and requires you to supply a matching wooden case. Warranty info is available from the manufacturer.
What Sets It Apart: Large 21‑lb capacity slab liner with 6 mm walls, designed to pair with a custom wooden case for high‑volume casting.
Best For: Hobbyist and small‑batch cold‑process soap makers who want a durable, food‑grade silicone liner to cast up to a 21 lb (336 oz) rectangular slab and pair with a custom wooden case.
Pros:
- Made from food‑grade, high‑temperature resistant silicone for safe, easy demolding and long‑lasting use.
- Generous 336 oz (9.5 L) capacity and 12.8 × 12.8 × 3.5 in inner dimensions ideal for large slabs.
- 6 mm wall thickness and 13.3 in outer dimensions designed to fit a matching wooden case for stable casting.
Cons:
- Sold as silicone liner only; wooden case not included and must be custom‑made to the outer dimensions.
- Single‑piece tray limits built‑in dividers or loaf‑size versatility without additional tooling.
- May be less rigid than hard molds, requiring careful handling when filled to avoid deformation.
- The capacity of this silicone soap mold is 335 oz, 20.9 lb , 9.5 L
- The inner size of this silicone mold is 12.8*12.8*3.5 inch (32.5*32.5*9 CM ); the thickness of mold side is 6 mm.
- The outer size of the silicone mold is 13.3*13.3*3.8 inch , (this size will be the inner size of your wooden case)
- The silicone mold is made of food grade silicone rubber, non-toxic,odorless, soft & flexible, easy demolding, high temperature resistance.
- Pls note this item is only silicone liner , there is no wooden case , you should make the wooden case to match the silicone tray .
X‑Haibei Floral Soap Silicone Mold (2.5 ” Dia.)
The X‑Haibei Floral Soap Silicone Mold is ideal for makers who want consistent, detailed 2.5‑inch bars—each of the six cavities holds about 2 oz and features a unique intricate floral pattern that demolds easily thanks to flexible, food‑grade silicone. You’ll appreciate its 9 × 6.5 × 1‑in footprint and 1‑in cavity depth for uniform cold‑process bars, lotion bars, or melt‑and‑pour projects. The U.S. food‑grade silicone withstands −40 °F to 440 °F, cleans quickly, and releases finished pieces without damage. Note colors may vary from images; check manufacturer warranty/support and the May 9 2024 availability if you need specifics.
What Sets It Apart: Six 2‑oz floral cavities in a compact oval design, delivering uniform decorative bars for gifts or personal use.
Best For: Makers and small‑batch soap or lotion‑bar crafters who want consistent, detailed 2.5‑inch floral‑shaped bars with easy demolding and quick cleanup.
Pros:
- Holds six uniform 2 oz cavities with unique intricate floral designs for professional‑looking bars.
- Made from U.S. food‑grade silicone resistant from −40 °F to 440 °F, suitable for cold process, melt‑and‑pour, lotion bars, and more.
- Highly flexible for effortless demolding and simple cleaning; compact 9 × 6.5 × 1‑in footprint.
Cons:
- Color is random and may not match product images, which could matter for presentation or branding.
- Only six cavities and 2 oz size may be limiting for larger production runs or those wanting varied sizes.
- Shallow 1‑in depth restricts thicker bar designs or multi‑layered pours.
- Dimensions & Capacity: Each cavity measures 2.5 inches in diameter and 1 inch in height, perfectly designed to hold approximately 2 oz of soap per bar. Create beautifully detailed, hand and bath-sized soap bars with ease.
- Material: Crafted from premium U.S. food-grade silicone, this mold offers exceptional durability and safety. Temperature resistant from -40°F to 440°F (-40°C to 230°C), making it ideal for both cold process and melt-and-pour soap making.
- Intricate Floral Designs: Each of the six cavities features a unique, beautifully detailed flower pattern, resulting in stunning, professional-looking soap bars. Color may vary (item is randomly sent and might not match the product images exactly).
- Easy Release & Cleaning: The highly flexible silicone ensures effortless demolding and quick cleanup, saving you time and effort.
- Versatile Use: Perfect for crafting elegant floral soaps, ideal for gifts, personal use, or seasonal creations—especially as summer approaches!
Tall Skinny Soap Mold with 9‑Ply Birch Box
For makers who want tall, distinctive bars without a bulky setup, the Tall Skinny Soap Mold with a 9‑ply birch box and flexible silicone insert gives you a professional, easy‑unmold solution—perfect for cold‑process or melt‑and‑pour batches in small workspaces. You’ll get a 12 × 4 × 5.5‑in birch box housing a 2.5 × 4 × 10‑in silicone liner that holds about 55 oz. The rigid wood exterior stabilizes pours and the thick silicone flexes for fast release; a lid helps manage the gel phase. It’s lightweight, reusable, and ideal when you want slim, elegant bars or multi‑use crafting projects.
What Sets It Apart: 9‑ply birch box provides rigid support for tall, slim 55‑oz loaves, delivering professional‑grade stability in a compact footprint.
Best For: Makers and small‑batch soapmakers who want tall, slim bars and a compact, professional‑quality mold for cold process or melt‑and‑pour projects.
Pros:
- 9‑ply birch box provides rigid support for stable pours and a professional appearance.
- Thick, flexible silicone insert allows easy unmolding and repeated use.
- Compact footprint (12 × 4 × 5.5 in) ideal for small workspaces and unique tall bar shapes.
Cons:
- Narrow silicone liner (2.5 × 4 × 10 in) limits batch size to ~55 oz, not ideal for large production runs.
- Wooden exterior may require care to avoid moisture damage over time.
- Tall, skinny shape may not suit customers preferring standard bar sizes or wider molds.
- 🧼 Durable Construction: Made with 9-ply Birch wood box and thick yet flexible silicone insert for long-lasting use.
- 🧼 Versatile Design: Tall and skinny shape allows for creating unique soap designs and shapes.
- 🧼 Easy Release: Flexible silicone mold ensures effortless removal of soap after curing.
- 🧼 Convenient Size: Compact dimensions make it suitable for small workspaces.
- 🧼 Multi-Purpose: Can be used for various cold process soap projects or other crafting needs.
42 oz Silicone Loaf Soap Mold with 5 Dividers
Crafted for small‑batch makers who need consistent slices, the 42 oz EVINIS silicone loaf mold with five acrylic dividers lets you pour once and split into uniform bars without extra trimming. You’ll appreciate the food‑grade silicone’s non‑stick surface and acrylic dividers that create even cavities: 8.1 × 3.5 × 2.4 in each, totaling 1.2 L (42 oz). It tolerates -40 °C to 230 °C, so it handles cold‑ and hot‑process soap, candles, resin, and even edible treats. Lightweight and easy to clean, the white rectangular mold arrives with five divider boards and unclutters your workflow for neat, repeatable batches.
What Sets It Apart: Integrated acrylic dividers create five pre‑sectioned bars, eliminating the need for post‑pour cutting.
Best For: Small‑batch soap makers, crafters, and hobbyists who want uniform bars and an easy‑to‑clean, versatile mold for cold/hot process soap, candles, resin, or edible treats.
Pros:
- Produces consistent, evenly sized bars with five acrylic dividers, reducing trimming and saving time.
- Food‑grade silicone is non‑stick, lightweight, and easy to unmold and clean.
- Wide temperature tolerance (-40 °C to 230 °C) allows use for hot process soap, candles, resin, and some food applications.
Cons:
- Divider boards are acrylic and may warp or stain over time with heavy heat or reactive materials.
- Relatively small capacity (42 oz total) may require multiple batches for larger production runs.
- White silicone shows stains or discoloration more easily than darker molds.
- 【Superior Silicone Material】- The soap mold is well made from high-quality silicone material, very safe and durable. Greatly suitable for be used on Hot Process and Cold Process from -40°C to +230°C (-40°F to 446°F)
- 【Making Beautiful Soap】- Coming with one soap making mold and five acrylic divider boards, you can freely make different beautiful soaps by using different combinations of tools, pretty easy and convenient
- 【Easy to Clean】- The mold and divider boards both have quite flat surface, which makes you effortlessly remove the soap from the mold and easily get the complete soap. Non-stick tools are very easy to clean
- 【Soap Mold Size】- 9.6"(L) x 5.1"(W) x 2.5"(H). Soap cavity: 8.1"(L) x 3.5"(W) x 2.4"(H), can produce 1.2L/42oz of soap
- 【Wide Applications】- The soap mold has food-grade silicone material and enough capacity, super perfect to make soap, loofah soap,lotion sticks, bath bombs, resin crafts, etc., also for making desserts, cakes, chocolate,candle, pet snacks, etc.
Forest Deer Silicone Soap Mold (Reusable, Nature Design)
If you want a nature‑themed mold that’s gentle on skin‑safe materials and easy to unmold, the Forest Deer Silicone Soap Mold is a top pick — its detailed woodland deer silhouette and ultra‑flexible, food‑grade platinum silicone make it ideal for soap makers, bakers, and crafters who need reusable, non‑toxic molds that release cleanly without release agents. You’ll appreciate the BPA‑free, skin‑safe material and -40 °F to 446 °F heat tolerance for melt‑and‑pour, cold‑process, resin, wax, fondant, or chocolate. The oval 3.15 × 2.28 × 0.98‑in cavity yields refined nature‑themed bars, weighs 2.08 oz, and includes manufacturer warranty support.
What Sets It Apart: Nature‑themed oval design made of platinum silicone delivers detailed, skin‑safe creations without the need for release agents.
Best For: Crafters and small‑batch soap makers seeking a nature‑themed, reusable, skin‑safe silicone mold that releases detailed designs easily.
Pros:
- Food‑grade platinum silicone is BPA‑free and non‑toxic, safe for soaps, chocolates, and fondant.
- Ultra‑flexible design releases creations cleanly without release agents and supports multiple materials (soap, resin, wax).
- Compact oval size (3.15 × 2.28 × 0.98 in) is ideal for favors, wedding soaps, and detailed nature‑themed bars.
Cons:
- Small cavity size may not suit those wanting larger soap bars or molds for bulk production.
- As a single‑piece generic mold, it may lack the durability or features of higher‑end branded molds for heavy commercial use.
- Colored “as pictured” option may vary and buyers wanting specific colors may have limited choice.
- 𝐅𝐨𝐨𝐝-𝐆𝐫𝐚𝐝𝐞 𝐏𝐥𝐚𝐭𝐢𝐧𝐮𝐦 𝐒𝐢𝐥𝐢𝐜𝐨𝐧𝐞** > BPA-free & non-toxic material , safe for skin-contact products like soaps 𝐏𝐞𝐫𝐟𝐞𝐜𝐭 𝐄𝐯𝐞𝐫𝐲 𝐓𝐢𝐦𝐞 𝐑𝐞𝐥𝐞𝐚𝐬𝐞 > Ultra-flexible design effortlessly pops out creations without tearing or distortion – zero release agents needed! 𝐌𝐮𝐥𝐭𝐢-𝐂𝐫𝐚𝐟𝐭 𝐕𝐞𝐫𝐬𝐚𝐭𝐢𝐥𝐢𝐭𝐲** > Works with melt-and-pour soap, cold process, epoxy resin, candle wax, fondant, and chocolates. Heat resistant (-40°F to 446°F / -40°C to 230°C). 𝐇𝐨𝐥𝐢𝐝𝐚𝐲-𝐑𝐞𝐚𝐝𝐲 𝐆𝐢𝐟𝐭𝐢𝐧𝐠** ideal for Christmas favors, woodland weddings, and nature-themed decor!
Hedume 4‑Pack Silicone Massage Soap Molds
Choose the Hedume 4‑Pack Silicone Massage Soap Molds when you want durable, food‑grade silicone molds that make demolding massage bars and small craft projects fast and hassle‑free. You get four rectangular cavities in blue or green, made from BPA‑free, non‑toxic silicone that’s oven‑, microwave‑, freezer‑ and dishwasher‑safe between -104 °F and 446 °F. The flexible, inherently nonstick material resists cracking, cleans easily, and speeds release for soap, lotion bars, candles, chocolates, bath bombs, crayons, or polymer clay. Lightweight and compact (11.69 × 4.53 × 3.03 in, 1.25 lb), it’s ideal for small batches; manufacturer warranty details available.
What Sets It Apart: Four color‑coded, flexible molds that handle a wide range of materials—from massage bars to chocolates—offering versatile, low‑profile use.
Best For: Crafters and small‑batch soap makers who need flexible, food‑grade silicone molds for massage bars, candles, chocolates, and other DIY projects.
Pros:
- Durable, food‑grade BPA‑free silicone that’s oven‑, microwave‑, freezer‑, and dishwasher‑safe (−104 °F to 446 °F).
- Flexible, inherently nonstick design makes demolding and cleaning fast and easy.
- Versatile use for soaps, lotion bars, candies, bath bombs, candles, crayons, and polymer clay.
Cons:
- Only four rectangular cavities may limit production for larger batches.
- Limited color options (Blue, Green) and a single shape choice.
- May not provide the rigid support needed for very soft or runny pours without an external tray.
- Safe To Use - Hedume soap making molds are safe used in oven, microwave oven, freezer and dishwasher. Temperature safe from-104 to +446 degrees Fahrenheit.
- High Quality - Made from food-grade silicone, non-toxic and tasteless. Silicone molds for kids too.
- Flexible and non-stick - Hedume silicone molds are soft and possesses inherently good release properties, making demolding essentially trouble free.
- Easy to Clean - Hedume silicone soap mold will not crack or crack like hard plastic molds. You can easily take out cupcakes or soap. Easy to remove soap and easy to clean.
- Wide Application - Great for creating you special own special chocolates, candies, candles, soaps, bath bombs, lotion bars, crayons, waxes, polymer clay and more.
12‑Pack 72‑Cavity Rectangular Silicone Soap & Candle Molds
For small‑batch makers who need volume without sacrificing uniformity, the 12‑pack of 72‑cavity rectangular silicone molds is a smart choice — you get twelve purple, nonstick trays that produce consistent 3.2 × 2.2 × 0.96 in bars, so you can run multiple batches or offer a variety of scents and sizes with minimal cleanup. You’ll appreciate the environment‑friendly silicone that handles -76 °F to 464 °F, so it works for cold‑process soap, lotion bars, and candles. Pop‑outs require only finger pressure, and cleanup is simple by hand or dishwasher. Note slight measurement or color variance; warranty support is available.
What Sets It Apart: High‑volume set of 12 trays delivering 72 uniform cavities for batch production and rapid multi‑scent runs.
Best For: Small‑batch soap makers, candle crafters, and DIY gift producers who need consistent, multi‑cavity molds for producing many uniform bars or candles quickly.
Pros:
- High volume: 12 trays totaling 72 cavities lets you run multiple batches or produce many items at once.
- Versatile & durable: environment‑friendly silicone tolerates -76 °F to 464 °F, suitable for soap, lotion bars, candles, and baking.
- Easy release & care: nonstick pop‑out design with simple handwashing or dishwasher‑safe cleaning.
Cons:
- Size/color variance: manual measurement and display differences may cause slight variation in cavity dimensions or color.
- Large footprint: 12 full‑size trays may require substantial storage or drying space.
- Material ambiguity: listing metadata also labels it as plastic, which may cause confusion about exact composition.
- HIGH QUALITY MATERIAL - This soap mold made of environment friendly high quality silicone, heat resistance(heat-resisting temperature -76F to 464 F), they are safe to use and built to last. suitable for handmade soap, DIY scented candles.
- EASY TO USE - Comes with non-stick coating design, you can just pop out with pressed finger to release easily and quickly from this silicone mold; And easy to clean by using hot water with dilute edible cleaning agent or put in dishwasher.
- WIDELY APPLICATION - Package contains 6 pcs molds, total 72 cavities(size 3.2 x 2.2 x 0.96 inch), designed with Rectangular shape.which makes this silicone soap molds not only as bath soap molds or body lotion bar molds but also perfect for making hand-made soap, handicrafts, handmade candle and so on.
- STYLISH - The silicone mold provides a great and valuable handmade soap,special gifts for your friends and family. Such as a present of Valentine's Day, Christmas, Mother's Day etc.
- BUY WITH TOTAL CONFIDENT - If you have any question with the soap molds, please feel free to contact us through Amazon for details.
Factors to Consider When Choosing Silicone Soap Molds for Cold Process Making
When choosing silicone molds for cold‑process soap, you’ll want to prioritize high‑quality, food‑grade silicone that holds shape and resists tearing. Consider the mold’s size and capacity, its thermal performance range for curing, and how easily the shapes will release without damaging details. If you plan to move or stack molds, a supportive wooden box can keep everything stable and protected.
Mold Material Quality
You’ll want high‑quality silicone that stands up to cold‑process soapmaking: opt for food‑grade or platinum‑cure silicone with strong tear resistance and flexibility so bars demold cleanly and the mold lasts. Check temperature tolerance (around −40 °F to +446 °F) so the mold handles lye heat, hot pours, and post‑cure without degrading. Prefer thicker, reinforced walls (about 4–6 mm) to resist deformation and preserve crisp edges on your loaf. Make sure the interior is non‑porous, glossy, and non‑stick to minimize soap residue and simplify cleaning. Finally, verify chemical safety — BPA‑free, phthalate‑free, and non‑toxic — so the material won’t leach or break down when exposed to caustic lye and oils.
Size and Capacity
Although size might seem like a simple choice, matching mold capacity and cavity dimensions to your batch and bar plans is essential for predictable results. Match mold capacity to your batch—choose a loaf that holds at least the total CP volume (common loaf capacities run ~42–47 oz / ~1.2 L to much larger slab liners). Check cavity dimensions (L×W×D): depth influences cure time and heat retention during the gel phase; deeper molds (>2.5–3 in / ~6–8 cm) hold heat longer and may gel more. If you want uniform bars without extra cutting, pick a mold whose length and volume align with your planned bar size and slicer spacing. For flexibility, use small individual cavities for samples and large loaf/slab molds for production runs. Finally, measure finished bar dimensions for packaging and display.
Thermal Performance Range
Because silicone’s temperature tolerance and insulating properties directly shape cold‑process outcomes, pick molds rated from about −40 °C to +230 °C so they survive freeze/thaw cycles, the exothermic gel phase, and any forced‑gel techniques without warping or losing flexibility. You’ll want thick, high‑quality silicone at that rating to keep edges true during hot pours or brief oven acceleration, preventing deformation or permanent set. Remember silicone’s low thermal conductivity: it insulates the batter, encouraging a stronger, slower gel that can change color migration and raise cracking risk if unaccounted for. If you force gel or use insulated boxes, prioritize heat‑stable silicone so repeated elevated internal temps don’t degrade flexibility. Finally, confirm dishwasher‑ and freezer‑safe specs so cleaning and thermal cycling won’t tear liners.
Shape and Release Ease
When choosing a silicone mold, think about how shape and cavity detail will affect release and slicing: simple rectangular loaf molds with straight sides and shallow depths (about 2–3 in) give predictable shrinkage and make uniform slicing easy, while deep reliefs, tall skinny cavities, or intricate textures can trap air and soap solids, complicating unmolding and cleaning. Choose wider, shallower cavities to release evenly and cut down risk of internal cracking during gel. If you want detail, pick thick, tear‑resistant food‑grade silicone that you can peel or press without distorting fine features. Avoid very tall skinny molds unless you’re prepared to demold carefully to prevent bending or warping thin bars. Support from a rigid outer frame helps maintain shape during pour and cure.
Supportive Wooden Box
A sturdy wooden box gives a flexible silicone liner the rigid support it needs so your loaf stays square through gel and cure, preventing bulging and uneven edges. Choose a box whose interior dimensions closely match the silicone insert so the liner sits snugly and the wooden frame supports the soap mass uniformly. Prefer natural woods like pine or birch for gentle insulation and gradual heat dissipation; they help color and swirl definition versus an unsupported silicone‑only mold. A fitted lid retains heat to promote gel and reduce surface cracking. Look for boxes with handles or a secure fit so you can move a filled mold safely and lower the chance of spills while the soap is still soft.
Cutter and Divider Options
Now that your silicone liner sits snugly in a supportive wooden box, think about how you’ll turn that single loaf into uniform bars—cutter and divider options make the difference between tidy, consistent slices and uneven pieces. Choose molds that accommodate compatible cutter sizes or include slots/dividers so you can slice evenly into desired widths (1‑inch increments help with curing and packaging). Removable acrylic or wooden divider boards create multiple cavities in one pour, cutting waste and enabling varied designs. Stainless steel straight and wavy cutters deliver durable, clean cuts; match cutter width and blade length to loaf dimensions to avoid uneven bars. Favor systems with snap‑in or recessed guides to prevent shifting during pouring and gelling, and consider numbered slicing boxes for faster packing and inventory.
Frequently Asked Questions
Can Silicone Molds Withstand Oven Curing or High Heat Beyond Soap Temperatures?
Yes — many food‑grade silicone molds can handle oven curing and higher temperatures, but you’ll need to check each mold’s rated temperature. You should confirm the maximum continuous and peak temps on the product label; common ranges are 200–500 °F (93–260 °C). If the mold’s rating is lower than your process, don’t use it. Avoid direct flame, broilers, and sharp tools, and test a small run before full production.
Do Silicone Molds Retain Scents or Colors Between Batches?
Yes — silicone molds can retain scents and colors between batches. Like a faint echo, residual oils and dye cling to crevices, so you’ll notice carryover if you don’t clean thoroughly. Rinse with hot water, use a mild detergent or vinegar soak, and let them fully air‑dry. For stubborn stains or scent, wipe with rubbing alcohol or a baking soda paste. Store dry and separate strong fragrances to avoid future contamination.
Are These Molds Food‑Safe for Cosmetic or Edible Uses?
Yes — many silicone molds are food‑safe, but you should check each manufacturer’s rating. You’ll want molds labeled “food‑grade,” “BPA‑free,” or with a food‑safe symbol. Even food‑safe silicone used for soap may retain oils, scents, or color; don’t reuse a mold for edibles if it previously held fragranced or colored soap. Clean thoroughly, avoid damaged molds, and when in doubt, reserve separate molds for cosmetics and food.
How Do I Repair a Tear or Puncture in a Silicone Mold?
I once patched a tiny canoe tear with duct tape—the boat floated again, but you’d trust it only for calm ponds. To repair a silicone mold, clean and dry the area, trim ragged edges, then use a silicone adhesive or RTV silicone sealant rated for that silicone type; roughen with sandpaper if compatible. Clamp or tape parts until cured, then test with water or a small test pour before full use.
Can I Use These Molds for Melt‑and‑Pour Soap Safely?
Yes — you can safely use silicone molds for melt‑and‑pour soap. They handle the lower pour temperatures well and release your finished bars easily. Avoid sudden extreme temperature changes and don’t use scratched or heavily torn molds for food or body products. Clean molds thoroughly between batches, and test any decorative paints or sprays off‑mold to guarantee they’re soap‑safe. Replace molds showing significant damage to keep results consistent and hygienic.
Conclusion
When choosing silicone soap molds for cold‑process making, trust your instincts and pick molds that match your workflow, whether you’re after a loaf, detailed shapes, or multi‑cavity efficiency. Consider durability, ease of unmolding, and cleanup—plus accessories like slicers or wooden lids that make life easier. Don’t be afraid to try a few styles; variety keeps your craft fresh and helps you find your go‑to tools without reinventing the wheel.